New material is adopted in a vibration film part of a loudspeaker,
and It's achieved to take out a smooth frequency response to the
High-resolution correspondence nondirectional loudspeaker
price (tax included)：
The spread of the sound given by all directions off 360 deg without both sides. The three-dimensional and deep sound space produced by a omni-directional loudspeaker. Presence of the sound as if the place which is you at all is on the same stage as players.
Omni-directional loudspeaker TS1000 which has debuted in 2011 as the first version of the Egretta brand can open tying of a conventional immobilized listening point and also get the good sound state by the room throat location. Space of its pleasant tone received voice of sympathy from many all people as well as winning a prize of a good design award and an audio signature machine prize. And it's reborn as the TS1000F which loads the high-resolution correspondence unit by the most new material and invents a new world sound of Egretta in 2016" EFU".
- Sound revival pleasant by nature by a omni-directional loudspeaker 360 deg
- With the diffuser which installed the loudspeaker unit to look up and was designed most suitably, to combine, more, Otoba of omni-directional is created. Wherever it’s heard, a wrapped pleasant sound can be sensed.
- Smooth high range by Hair driver is achieved.
- A tweeter of a this machine makes the film which was folded like the bellows called “Hair driver system” shrink in a crosswise direction, and the special loudspeaker unit which makes a sound is adopted.
- The “polymer Clay composite film” which made the clay a principal raw material is adopted as Hair driver.
- It was the mainstream that kapton material (the polyimide/macromolecule material) is used for the film material up to now with long history, but Hair driver planned for reproduction of the more natural sound by adopting the new development material as “polymer Clay composite” as this product and reforming more processes including the one on the occasion of a film.
- Good 2 way speaker system of the connection of the sound
- Hair driver of a this machine contrasts the small range only of the high note in the taken charge of general tweeter unit, and covers it with 2 unit loudspeaker composition which is to cover a wide band from the medium level to super-high range and is simple to the high-resolution band.
- Plaster was done, the appearance which calmed down
- The “plaster” given to a steel case part makes shadow of soft light and the appearance which calmed down more impressed and produces the world of Egretta along with the sound quality excellent in quality to complete it.
The in-house new development Hair driver type tweeter
A tweeter is to make the film folded like a bellows elastic in a crosswise direction, and the structure which is called Hair driver system from which sound is released. It was the mainstream that the former Hair driver is able to use the polyimide/macromolecule material. The film which was adopted as Hair driver I have done in-house development of this time adopts the new development material as the polymer Clay composite. This new material which makes the clay a principal raw material was being chosen as joint development of Sumitomo Seika Chemicals Co., Ltd. and AIST, the further most suitable acoustic characteristic was being pursued from discovery of a possibility as the vibration film of Hair driver and a study was being advanced.
The technology into which this special film is processed as a diaphragm of Hair driver is also developed originally. The result and an audible area, a high-performance loudspeaker of a marvelous wide microwave was born from territory to the hypersonic territory beyond 50kHz.
The structure of hair driver type tweeter
World’s first new material polymer Clay compositeWhat is ‘new material polymer Clay composite’ ?
A polymer Clay composite makes the clay by joint development of Sumitomo Seika Chemicals Co., Ltd. and a national corporation National Institute of Advanced Industrial Science and Technology chemistry process research section of research and development a principal raw material, and is great flexibility (trademark: Tough clay strike) (hereafter: Sumitomo Seika Chemicals) (hereafter: AIST), a high heat resistance and the new function data” with low heat-shrinkable properties.
During advancing research and development of the loudspeaker unit, we met the “polymer Clay composite” which was the existence which isn’t learned about yet in an age and aimed at a possibility as the sound material from its special quality. Moreover optimization of the origin acoustic characteristic of the cooperation of Sumitomo Seika Chemicals and AIST was advanced and adoption to Hair driver was achieved.
Reference data 1：national corporation National Institute of Advanced Industrial Science and Technology chemistry process research section of research and development
Reference data 2：tough clay strike (the PDF form For relevant mentioning, after 6 pages)
The installation situation with the floor becomes important for improvement of the further sound quality as a high-resolution correspondence loudspeaker. Please feel the thickness of the sound which is equipped with the exclusive insulator from which a powerful low voice is drawn out and expands into from low range into super-high range without a stress.
The color variation
Black (no black gloss)
Wood pattern Lauren Sycamore
Wood pattern Lauren Sycamore
Wood pattern jaguarbar-like
A color variation product will be a customization model.
It’ll be production after receipt of order, so please accept it.
A picture of indication will be an image figure. The color taste is different from an actual product.
When there is no stock of each color variation, I receive time until delivery.
The color variation material is sometimes changed without expectation.
|Body color||Sparkle white (white plaster (fabric) * barrel only)|
|Unit||5cm polymer clay composite film Heil driver
type 13mm polypropylene cone type speaker
|Frequency characteristics||44 to 45,000Hz|
|Output sound pressure level||87dB/2.83V/1m|
|Enclosure type||bass reflex system|
|Mass||about 11.2kg / piece, 2pcs / set about 16kg|
|External dimensions||about (W)330×(H)960×(D)330 mm|
|Country of origin||Japan (Hiroshima)|
Product specifications are subject to change without notice.
(except Saturdays, Sundays
and our closed days)